How to Use a ONE-TOUCH Magnetic Holder for Thick Cards

By Ultra PRO International - THE Standard in Safe Storage | Published: 2026-10-25

Category: How-to Guides

Learn how to safely store thick trading cards in a ONE-TOUCH magnetic holder. Step-by-step guide for 130pt and 360pt holders, plus tips to avoid damage.

Quick Answer

To use a ONE-TOUCH magnetic holder for thick cards, slide the card into the recessed compartment of the bottom half, then close the top half and let the magnets secure it. No screwdriver or tools are needed.

Why ONE-TOUCH Holders Work for Thick Cards

Thick trading cards—such as rookie relics, patches, or memorabilia cards—often exceed the thickness of a standard 35pt to 75pt top loader. ONE-TOUCH magnetic holders are designed with a two-piece slide-in hinge and magnetic closure, so you can store thicker cards without screws or pressure points that could bend the card.

The 130pt and 360pt sizes accommodate cards up to those thicknesses. The UV-blocking, acid-free, no-PVC construction helps preserve the card's condition over time, making these holders a final storage destination rather than a temporary sleeve.

Choosing the Right Thickness (130pt vs 360pt)

Before inserting a card, confirm its thickness. Standard trading cards are around 20pt to 35pt. Thick memorabilia cards often fall into the 130pt range, while super-thick cards (like some multi-patch or jumbo relics) require a 360pt holder. Using a holder that is too thin can force the card in and damage edges; using one that is too thick leaves the card loose and unprotected.

If you are unsure, measure the card's thickness with a caliper or check the manufacturer's specification. Ultra PRO's 130PT Black Border UV ONE-TOUCH holder and the 360PT UV ONE-TOUCH holder are both designed for thick cards, but they are not interchangeable.

Step-by-Step: How to Insert a Thick Card

Step 1: Check the card thickness and choose the correct ONE-TOUCH size: Confirm that your card fits a 130pt or 360pt holder. If the card is loose or too tight, switch to the appropriate size. Using the wrong thickness can damage the card or fail to protect it.
Step 2: Open the holder by lifting the top half: The ONE-TOUCH holder has a slide-in hinge; gently lift the top half away from the bottom. Do not force it—the magnets hold it securely but release easily. Never pry the holder open with a tool; the plastic can crack.
Step 3: Place the card into the recessed compartment of the bottom half: Hold the card by its edges and lower it straight down into the recessed area. Ensure the card sits flat and is fully inside the recess, not overlapping the edges. If the card does not sit flat, remove it and check for debris or an incorrect thickness.
Step 4: Close the top half and let the magnets engage: Align the top half with the bottom and lower it until the magnets click together. The holder should close evenly with no gaps. A gap means the card is too thick for that holder—switch to a larger size.
Step 5: Inspect the sealed holder: Check that the card is centered, not bent, and that the holder's edges are flush. Store the holder upright or flat, away from direct sunlight. Store in a cool, dry place to preserve the UV-blocking properties.

Product Facts

130PT Black Border UV ONE-TOUCH® Magnetic Holders (5ct): The Black Border ONE-TOUCH holder features a black border to frame your card and uses a slide-in hinge with magnetic closure. The black border gives a clean display look while the magnetic closure lets you open and close the holder without tools, reducing the risk of scratching the card during insertion.
130PT Black Border UV ONE-TOUCH® Magnetic Holders (5ct)
360PT UV ONE-TOUCH® Magnetic Holder: The 360PT UV ONE-TOUCH holder is designed for super thick collectible trading cards and uses UV-blocking additives and non-PVC materials. If you have a jumbo relic or multi-patch card, the 360PT provides enough depth to hold it securely while protecting against UV rays that can fade ink over time.
360PT UV ONE-TOUCH® Magnetic Holder